*** Installing and Running BrightForms for Android and BrightBuilder ***

1. You will need to download the BrightBuilder setup installation file.  

2. Install BrightBuilder and follow the installation instructions.  Take note of the installation
directory that you choose, in case you choose other than the default.

3. Start-up BrightBuilder using the new shortcut, or by executing <YOUR_INSTALL_DIR>/bin/brightbuilder.exe.  

4. BrightForms for Android supports devices running version 4.1 or greater.  To run 
a project on an Android device, you must first enable USB debugging on the device.  Go 
to the Settings menu from the Home screen, and select "Applications", then 
"Development", and then turn on "USB Debugging".  You may be prompted to restart your
device at this time.

5. Connect the device to the BrightBuilder host machine by USB cable.  After the USB cable 
is connected, the Android device may prompt to ask what kind of connection is 
required.  Select "Charge Only".  You should see the USB symbol and the "USB Debugging" 
symbol (an exclamation in a triangle) appearing in the notification bar at the top 
of the device screen.

6. Make sure that the USB driver successfully loads on the operating system of the
development machine.  It may be necessary to download the correct USB driver from 
the OEM provider of the Android device.  For example, go to www.htc.com for HTC devices.

7. If the USB driver is connected successfully on the development machine, and the
USB and USB Debugging icons appear on the device, then you are ready to run your
BSP project on the device.

8. Now select the BSP to run and select "Execute on Android Device" either from the
right-click context menu or the main tool bar.

9. BrightBuilder will firstly validate the project, then install BrightForms to the Android
device, and finally launch the project on the device.

10. If BrightForms installed properly, then you should see the BrightForms icon in 
the "All apps" area with the blue butterfly logo.

11. SPECIAL NOTE: On some devices, such as Samsung Galaxy Tab, the files must be put into a 
different folder on the device for BrightForms to run.  In this case put 
"/mnt/sdcard/external_sd/Android/data/au.com.brightsoft.android.application/files" in
the BrightBuilder "Android Export Option" in the Options dialog.  
This is the folder that BrightBuilder will download the files to.

12. For further information and trouble-shooting, please contact Bright Support on
support@brightxpress.com.